cuda1949
-
Posts
18 -
Joined
-
Last visited
-
Days Won
4
Reputation Activity
-
cuda1949 got a reaction from Moab in The Golden Swan by Cuda1949 based on the 1588 English Galleon Ship in a bottle
Starting a new build The Golden Swan based on the 1588 English Galleon as pictured in Wolfram Zu Mondfeld book "Historic Ship Models" The hull is carved from
sourwood. Usually I use Holly but wanted to try a different wood. The deck will be spit from the hull so the ship will be in two pieces so it can be placed in the bottle when done. I am building her in between sessions with my Cutty Sark that I am also building.
Here is a picture of The Cutty Sark I am working on. Too big to fit in a bottle.
-
cuda1949 reacted to IgorSky in Captain Jack Sparrow arrives in Port Royal in bottle - 1:72
And finally, Jack took his place on the mast.
-
cuda1949 got a reaction from JesseLee in The Golden Swan by Cuda1949 based on the 1588 English Galleon Ship in a bottle
Made some progress I have started planking the hull. Slow going as I am also working on my Cutty doing ratlines. Deciding how I am going to attach the planking to the upper deck as this is the part that separates.
-
cuda1949 got a reaction from Jeff B in The Golden Swan by Cuda1949 based on the 1588 English Galleon Ship in a bottle
Made some progress I have started planking the hull. Slow going as I am also working on my Cutty doing ratlines. Deciding how I am going to attach the planking to the upper deck as this is the part that separates.
-
cuda1949 got a reaction from Onni in The Golden Swan by Cuda1949 based on the 1588 English Galleon Ship in a bottle
Made some progress I have started planking the hull. Slow going as I am also working on my Cutty doing ratlines. Deciding how I am going to attach the planking to the upper deck as this is the part that separates.
-
cuda1949 got a reaction from James w rogers in The Golden Swan by Cuda1949 based on the 1588 English Galleon Ship in a bottle
Made some progress I have started planking the hull. Slow going as I am also working on my Cutty doing ratlines. Deciding how I am going to attach the planking to the upper deck as this is the part that separates.
-
cuda1949 got a reaction from IgorSky in The Golden Swan by Cuda1949 based on the 1588 English Galleon Ship in a bottle
Made some progress I have started planking the hull. Slow going as I am also working on my Cutty doing ratlines. Deciding how I am going to attach the planking to the upper deck as this is the part that separates.
-
cuda1949 got a reaction from exwafoo in The Golden Swan by Cuda1949 based on the 1588 English Galleon Ship in a bottle
Just a quick update/ I removed the upper part of the ship and made new parts which are permanently glued to the hull. I made a separate poop deck which will be attached once the ship is in the bottle. Pictures to follow.
-
cuda1949 got a reaction from Chasseur in The Golden Swan by Cuda1949 based on the 1588 English Galleon Ship in a bottle
Just a quick update/ I removed the upper part of the ship and made new parts which are permanently glued to the hull. I made a separate poop deck which will be attached once the ship is in the bottle. Pictures to follow.
-
cuda1949 got a reaction from Chasseur in The Golden Swan by Cuda1949 based on the 1588 English Galleon Ship in a bottle
A short update. I have added the fore and aft decks to the hull. The decks have been painted a light gray. I have drilled the holes for the masts which I intend to put thread into the bottom of the mast and pass it through the hull. I also placed a grove on the underside of the hull so I can run the threads for the masts out of the hull when the ship gets placed in the gallon bottle. I also decided to stain the planks for the hull a dark walnut and the planking will be the next step.
-
cuda1949 got a reaction from JesseLee in The Golden Swan by Cuda1949 based on the 1588 English Galleon Ship in a bottle
Just a quick update/ I removed the upper part of the ship and made new parts which are permanently glued to the hull. I made a separate poop deck which will be attached once the ship is in the bottle. Pictures to follow.
-
cuda1949 got a reaction from IgorSky in The Golden Swan by Cuda1949 based on the 1588 English Galleon Ship in a bottle
A short update. I have added the fore and aft decks to the hull. The decks have been painted a light gray. I have drilled the holes for the masts which I intend to put thread into the bottom of the mast and pass it through the hull. I also placed a grove on the underside of the hull so I can run the threads for the masts out of the hull when the ship gets placed in the gallon bottle. I also decided to stain the planks for the hull a dark walnut and the planking will be the next step.
-
cuda1949 got a reaction from James w rogers in The Golden Swan by Cuda1949 based on the 1588 English Galleon Ship in a bottle
Just a quick update/ I removed the upper part of the ship and made new parts which are permanently glued to the hull. I made a separate poop deck which will be attached once the ship is in the bottle. Pictures to follow.
-
cuda1949 got a reaction from DSiemens in The Golden Swan by Cuda1949 based on the 1588 English Galleon Ship in a bottle
A short update. I have added the fore and aft decks to the hull. The decks have been painted a light gray. I have drilled the holes for the masts which I intend to put thread into the bottom of the mast and pass it through the hull. I also placed a grove on the underside of the hull so I can run the threads for the masts out of the hull when the ship gets placed in the gallon bottle. I also decided to stain the planks for the hull a dark walnut and the planking will be the next step.
-
cuda1949 got a reaction from JesseLee in The Golden Swan by Cuda1949 based on the 1588 English Galleon Ship in a bottle
A short update. I have added the fore and aft decks to the hull. The decks have been painted a light gray. I have drilled the holes for the masts which I intend to put thread into the bottom of the mast and pass it through the hull. I also placed a grove on the underside of the hull so I can run the threads for the masts out of the hull when the ship gets placed in the gallon bottle. I also decided to stain the planks for the hull a dark walnut and the planking will be the next step.
-
cuda1949 got a reaction from James w rogers in The Golden Swan by Cuda1949 based on the 1588 English Galleon Ship in a bottle
A short update. I have added the fore and aft decks to the hull. The decks have been painted a light gray. I have drilled the holes for the masts which I intend to put thread into the bottom of the mast and pass it through the hull. I also placed a grove on the underside of the hull so I can run the threads for the masts out of the hull when the ship gets placed in the gallon bottle. I also decided to stain the planks for the hull a dark walnut and the planking will be the next step.
-
cuda1949 got a reaction from Bernard Kelly in The Golden Swan by Cuda1949 based on the 1588 English Galleon Ship in a bottle
A short update. I have added the fore and aft decks to the hull. The decks have been painted a light gray. I have drilled the holes for the masts which I intend to put thread into the bottom of the mast and pass it through the hull. I also placed a grove on the underside of the hull so I can run the threads for the masts out of the hull when the ship gets placed in the gallon bottle. I also decided to stain the planks for the hull a dark walnut and the planking will be the next step.
-
cuda1949 got a reaction from IgorSky in The Golden Swan by Cuda1949 based on the 1588 English Galleon Ship in a bottle
Thanks for the kind words and yes it has ben scratch built but received the hull from my son. It sat in my ship room for 8 or 9 years. I finally decided to build it. All I had was some plans for a clipper ship and plane from the Scientific model. So even though the hull was complete I have scratched built the rest. I also purchased Longridges book on the Cutty Sark and used it for references. I am doing the ratlines right now and it has been a year since I started the build.
-
cuda1949 got a reaction from IgorSky in The Golden Swan by Cuda1949 based on the 1588 English Galleon Ship in a bottle
Starting a new build The Golden Swan based on the 1588 English Galleon as pictured in Wolfram Zu Mondfeld book "Historic Ship Models" The hull is carved from
sourwood. Usually I use Holly but wanted to try a different wood. The deck will be spit from the hull so the ship will be in two pieces so it can be placed in the bottle when done. I am building her in between sessions with my Cutty Sark that I am also building.
Here is a picture of The Cutty Sark I am working on. Too big to fit in a bottle.
-
cuda1949 got a reaction from Onni in The Golden Swan by Cuda1949 based on the 1588 English Galleon Ship in a bottle
A short update. I have added the fore and aft decks to the hull. The decks have been painted a light gray. I have drilled the holes for the masts which I intend to put thread into the bottom of the mast and pass it through the hull. I also placed a grove on the underside of the hull so I can run the threads for the masts out of the hull when the ship gets placed in the gallon bottle. I also decided to stain the planks for the hull a dark walnut and the planking will be the next step.
-
cuda1949 got a reaction from exwafoo in The Golden Swan by Cuda1949 based on the 1588 English Galleon Ship in a bottle
Starting a new build The Golden Swan based on the 1588 English Galleon as pictured in Wolfram Zu Mondfeld book "Historic Ship Models" The hull is carved from
sourwood. Usually I use Holly but wanted to try a different wood. The deck will be spit from the hull so the ship will be in two pieces so it can be placed in the bottle when done. I am building her in between sessions with my Cutty Sark that I am also building.
Here is a picture of The Cutty Sark I am working on. Too big to fit in a bottle.
-
cuda1949 got a reaction from James w rogers in The Golden Swan by Cuda1949 based on the 1588 English Galleon Ship in a bottle
Thanks for the kind words and yes it has ben scratch built but received the hull from my son. It sat in my ship room for 8 or 9 years. I finally decided to build it. All I had was some plans for a clipper ship and plane from the Scientific model. So even though the hull was complete I have scratched built the rest. I also purchased Longridges book on the Cutty Sark and used it for references. I am doing the ratlines right now and it has been a year since I started the build.
-
cuda1949 got a reaction from James w rogers in The Golden Swan by Cuda1949 based on the 1588 English Galleon Ship in a bottle
Starting a new build The Golden Swan based on the 1588 English Galleon as pictured in Wolfram Zu Mondfeld book "Historic Ship Models" The hull is carved from
sourwood. Usually I use Holly but wanted to try a different wood. The deck will be spit from the hull so the ship will be in two pieces so it can be placed in the bottle when done. I am building her in between sessions with my Cutty Sark that I am also building.
Here is a picture of The Cutty Sark I am working on. Too big to fit in a bottle.
-
cuda1949 got a reaction from Chasseur in The Golden Swan by Cuda1949 based on the 1588 English Galleon Ship in a bottle
Thanks for the kind words and yes it has ben scratch built but received the hull from my son. It sat in my ship room for 8 or 9 years. I finally decided to build it. All I had was some plans for a clipper ship and plane from the Scientific model. So even though the hull was complete I have scratched built the rest. I also purchased Longridges book on the Cutty Sark and used it for references. I am doing the ratlines right now and it has been a year since I started the build.
-
cuda1949 got a reaction from Bernard Kelly in The Golden Swan by Cuda1949 based on the 1588 English Galleon Ship in a bottle
Starting a new build The Golden Swan based on the 1588 English Galleon as pictured in Wolfram Zu Mondfeld book "Historic Ship Models" The hull is carved from
sourwood. Usually I use Holly but wanted to try a different wood. The deck will be spit from the hull so the ship will be in two pieces so it can be placed in the bottle when done. I am building her in between sessions with my Cutty Sark that I am also building.
Here is a picture of The Cutty Sark I am working on. Too big to fit in a bottle.