As I have been posting, I have been collecting ship in the bottle kits lately. Most of these escaped me in my youth since they came during my hiatus from modeling. At a certain age, one’s interests mature and things of youth are left behind. It takes a certain amount of curiosity to become interested in the less superficial aspects of modeling and requires a certain maturity to appreciate historical significance and fine craftsmanship.
I’ve encountered a variety of different compositions of these kits. All the ones I’ve reported on so far are some variation of materials to be placed inside a glass bottle. The tradition of the activity has been building a model from wood and placing it inside a glass bottle with a sea made of putty since these are the materials that a person at sea may have had available to the them. To make the activity more accessible to the common person, lately more modern materials have been incorporated and some techniques have been improved and modified. Our seafaring predecessors may have appreciated some of these materials, such as CA “super glue” and tools such as small spiral drills and pin vises - not to mention accurate plans. And maybe they would have been repulsed by some other ideas. I like to stay as close to a traditional build as possible, but I do appreciate some modern conveniences such as my tiny drill bits and CA.
This kit deviates from the tradition in that it is a plastic model of a ship to be placed into a glass bottle. It actually has a very nice glass bottle and a neat little stand for it. The introduction on the instruction sheet states: “In this kit, modern methods and materials have been used to allow you to re-create this fascinating craft and learn age-old skills. None of the original ingenuity has been lost!” But in reality I’m gluing together a pre-fabricated plastic hull and parts to be placed inside a glass bottle. How much ingenuity is that?
So here I present the kit made by Airfix (Humbrol limited) “Cutty Sark” # 6003. There were also two other kits in this series: the “Mayflower” and “Charles W. Morgan”. These are all well know historical ships with the “Cutty Sark” and the “C.W.Morgan” still preserved for observation so there should be some expectation of detailed accuracy.
The kit is well presented in very nice packaging and a very elaborate instruction sheet with various language interpretations. But it contains no historical information about the ship. My first impression when I received the box was how large the kit is. The box measures 12”x 14.5”. The kit contains a very nice large rectangular flask type bottle that measures 8.5” x 4.5” (from the tip of the neck). The neck opening is so large I can put my thumb into it. Also included is the only wooden part, a nice stand to place the bottle on complete with plastic whale carvings. A long with the plastic parts for the hull, masts and spars and a sheet of plasticized paper sails are a set of paints with small brush, tubes of glue for paper and plastic, rigging thread and cordage for neck decoration, a metal tool for model insertion and a cork for the neck - and of course the completely hardened by now white and blue modeling clay. There is also a plastic rigging stand that doesn’t look like it could be repurposed for use with a wooden model. Also included are little plastic dolphins and a small light house for embellishments to be placed in the putty sea.
One of the reasons I bought this kit was for my preparation to build a “Cutty Sark” model which is the final model in the Jack Needham book. I didn’t have a bottle large enough for his dimensions and I wanted a sail plan. So my initial plan is to repurpose the bottle and some materials perhaps to build a wooden model using the dimensions from the plastic one and repurpose the sails. It just seems like a shame to put a plastic ship into such a nice bottle.
I haven’t built a plastic model since my pre-teen years and I wasn’t that enthusiastic about it then. I think it does require some sophistication to build a convincing plastic model and that it is a legitimate modeling hobby but it strays a bit far from the tradition of putting a ship in a bottle. But the kit is a nice kit for what it is.
Buenas y saludos:
Les comparto el paso a paso de este bote, faltan algunas imagenes pero creo que se pueden interpretar, cuando estaba colocando la primera vela dentro de la botella al cortar los hilos sobrantes, la hoja me jugó una mala pasada, ustedes vean algunas imagenes raras de hilos sueltos y se daran cuenta que es cuando sin querer corte un hilo por que paso y como lo reconstrui, de todos modos ya saben si alguien quiere informacion especifica de alguna imagen solo tiene que preguntar, con gusto lo hare ayudarlo y explicar todo lo que quiera, cuando uso el traductor de Google, me resulta inaccesible comentar imagen por imagen y ahora me estoy quedando sin tiempo.
Gracias por su comprensión.
