HGRogers

DSiemens - thanks for the tip about the bamboo skewers. That's exactly the kind of stuff I came to this site for.  I have some in my kitchen actually but the diameter seems too big. I'll see what I can do though--whether it's buy smaller ones (if available) or just sand them down.

You can pick up some very nice bamboo skewers in chinese food stores/supermarkets.  When you select your pack, look for skewers that are richer in color, some in which you can see the grain of the wood, this means they will be stronger and hold there shape, even when turned down very fine.  Don't use the clear almost white skewers (they have no strength).  I have tried draw plates, and didn't like them.  You can't get a tapered look with a draw plate and they don't work for all woods.

 It's very easy and faster to cut a skewer in half, and insert it into a dremel tool.  Place a piece of sandpaper on the edge of the table, fold it over, and insert the bamboo stick.  Put gentle pressure on the skewer and gently move the dremel tool back and forth.  You can turn down a skewer to needle thickness or finer if you are careful!

Here's an example of a ship in bottle I built using mahogany planking over a basswood hull, which was carved in three sections.

I started building ships in bottles with a wonderful chunk of black walnut.  I started with that because it was what I had at the time.  It's a very hard wood, dark in color, and hard on the tools, but the piece I had was extremely dense, tight grained, and of excellent quality.  The quality of that piece is hard to come by unless recuperated from old furniture, or you have the luck to stumble across a good stock.  I also carved teak for a while, but it was a bit to fibery and brittle, not to mention extremely irritating to my eyes and nose. Now I use basswood, but really want to try something else, since it does have the tendency to get fuzzy on the edges when sanded.  As David mentioned, I too am interested in fruits woods, boxwood, and would really like to try holly.

For the masts, I originally used long leaf yellow pine and still have some strips lying around that where recuperated from the porch floor boards of an abandoned house.  It worked really well for the masts since it was extremely strong with long fibers, while at the same time, flexible but not brittle. The color also worked well for the masts.  I now use bamboo skewers, turned down.  In my opinion it is the best wood for masts, since it is extremely flexible, strong, has a nice color, and easily drilled.  I  can turn the masts down to a mm or less in thickness as well.  

I often lay planking down on the decks and have used everything from fur, pine, basswood, mahogany, jatoba, and even teak, which unfortunately does not slice well and is extremely brittle and hard to work with. 

And finally, I use HDU board (high density urethane) for carving modern, fiberglass hulls, which often have more rounded/odd shapes.  I ordered a box of scraps (of high density grade) from a sign company and it works great for powerboats.  Since its not wood, it carves in all directions and keeps its edge really well.  The only drawback is that it has a tendency to break or chip when carving to a point or sharp angle, but sands like a dream.  

I hope to experiment in the future with some other woods!!

Hi everyone who has joined so far! 

A short intro...I have been building ships in bottles for about five years now and am members of different organizations and online communities.  I'm American but currently living in Switzerland where my primary activity is building ships in bottles! 

I wish you all the best in your projects, and I hope to see some of your build logs in the future!  

Here's one of my recent builds!