Onni Posted November 29, 2019 Author Report Share Posted November 29, 2019 54 minutes ago, Spanky said: Onni, very,, very nice. May I ask, did you cut your hull with a scroll saw? Thanks, again very impressive, so much knowledge around here. Even though I have access to a scroll saw I don't like to use it so much as the blade tends to 'jump' around too much for my liking, so I used a small hobby band saw with fine teeth;still a bit nerve wracking though. Before cutting up the hull I drill 2x 1mm diameter holes through the hull ,vertically and horizontally so after the cut/cuts these holes will line up perfectly and I can peg the hull together so that it virtually looks like a complete hull again. Hope this answers your question. Donald 1 Quote Link to comment Share on other sites More sharing options...
Donald Posted November 30, 2019 Report Share Posted November 30, 2019 On 11/29/2019 at 11:15 AM, Onni said: Even though I have access to a scroll saw I don't like to use it so much as the blade tends to 'jump' around too much for my liking, so I used a small hobby band saw with fine teeth;still a bit nerve wracking though. Before cutting up the hull I drill 2x 1mm diameter holes through the hull ,vertically and horizontally so after the cut/cuts these holes will line up perfectly and I can peg the hull together so that it virtually looks like a complete hull again. Hope this answers your question. Thank you, that was helpful. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.